If you are not aware, the neckline is the region where your neck meets the underside of your face and can be located under your chin towards your throat.
It is also the time at which the majority of beards should cease growing and give way to a shaved throat and neck.
It can be totally shaved or progressively stubbled to fade away depending on the type of your beard, and it only rarely looks nice if unmanaged or simply lightly groomed.
There are several advantages to paying close attention to your beard’s neckline.
From the side, a clean edge will make your beard hair appear fuller. Failure to appropriately build a neckline might result in a double chin. It usually happens when a newbie trims an area where it should not be.
When the hairs on your neck grow wild and out of control, they may pinch and irritate you. Keeping your beard neckline in check will keep stray hairs at bay and regulate an otherwise flawless beard’s out-of-control region.
However, what do you do when you have accidentally trimmed your neckline to be too high?
It can be hard to fight that initial panic, but rest assured because this guide will tell you everything that you need to know about the beard neckline, including how to repair a neckline so that this never happens again!
How To Find Your Neckline
First and foremost, you need to make sure whether your beard neckline is in fact too high. Simply put, your beard neckline is where your beard ends, which is usually someplace around your neck.
Some beard styles, such as a goatee or chinstrap, never grow down to your neck thus no beard neckline that is too high off your neck, while others, such as the full beard, do.
Unless the neckline makes the beard look good and compliments the rest of your face, it can be really frustrating as it can also look a bit strange – especially if you are not used to it.
So, finding where your beard neckline should be is very important! This is the first thing you should do before trimming, as this can make or break the finished result.
Here are some methods that you can try depending on your beard size and face shape.
If you have a large beard and a round face, then it is recommended to create the neckline a bit lower down on the neck. This will help create the illusion of a sharper jawline and will make the beard look as full as possible.
The combination of a large beard and square face means that the neckline will look best a bit higher up so that it can accent the sharp jawline that is typical of those with square faces.
By having a neckline that is higher up, you will also draw more attention to your facial features.
If you have a short beard and a round face – it is recommended to drop the neckline down a bit as this will create a more defined jaw by creating more fullness on either side of the beard.
Finally, a short beard and square face combination will look best if you have a high neckline. This will help contour the jawline and create a strong silhouette.
If you are not sure as to what your face shape is or would prefer a more traditional approach to figuring out where to put your neckline, then you can try these two methods instead.
Locate your Adam’s apple and lay two of your fingers on top of it. The top of your fingers should be about where the bottom of the neckline should be.
Tilt your head downward for an even simpler way. Where the bottom of your jaw meets the top of your neck, a crease will form. Straighten your neck and place your finger on the crease.
Are Necklines Important?
Almost all beard shapes and styles entail shaving or close trimming the hair going up your neck towards the area beneath your chin. The only possible exception is the full, thick, and extremely long beard, which is precisely that: full, thick, and very long.
Even so, you don’t want hair growing down your neck and trying to link up with your chest hair, thus understanding how to detect and trim your neckline is crucial knowledge for any bearded person.
Defining the neckline with a distinct cut edge neatens your beard, keeping the lines clean for smart designs, and provides a well-kept look. A well-defined neckline is also a great technique to make your beard appear bigger from the side — something you won’t notice, but others will.
There’s also the option of having a line fading off without a visible cut, gradually growing shorter away from the beard until it becomes non-existent.
Trimming the neck, in addition to improving the overall appearance of your greatest facial feature, prevents painful irritation and the all-too-common scenario of an out-of-control, dirty, unhealthy spot on an otherwise flawless beard.
Trimming Your Beard Neckline
It’s not enough to disregard your own beard neckline because you can’t see it. When you’re only wearing stubble, you might be able to get away with not maintaining your neckline.
However, after it has progressed past the stubble stage and begins to form a complete beard, it is time to begin grooming. A well-defined and well-kept beard neckline nearly always looks nicer and neater.
Here are the tools that you will need and how you should use them.
Using A Trimmer
This is the tool you’ll use to shape and trim your beard’s neckline. Above all, a good beard trimmer may help you take your beard maintenance to the next level.
While choosing a beard trimmer, consider its adaptability, whether it is corded or cordless (or both), the attachments that come with it, the length of your beard, and whether you can use it when your face and beard are wet (or dry), and blade quality.
Stainless steel, chromium, and titanium blades often last longer. They also deliver a more pleasant, cleaner shave.
There are certainly many different trimmers to pick from, each with its own price range. If you don’t already have a trimmer that you like, keep a few things in mind to help you pick the appropriate one.
Other equipment needed for comprehensive beard grooming includes a beard bib for quick cleansing, beard oil for nourishing, and a beard balm or wax for style.
Keep your chin up and use your fingers to stretch the skin behind your chin as you trim.
If your head is slanted down or your skin is not stretched, the skin might bunch, causing you to miss or cut yourself.
Once you’ve decided where you want your neckline to go, the first thing you should do before you begin cutting is wash your face and neck.
You may use warm water in conjunction with your regular cleanser to open up your pores and soften your hair. This will benefit you since it will let you get as near as possible with your trimmer. After washing your face, gently pat it dry with a towel.
Set The Trimmer Length
Set the beard trimmer length to no less than two levels shorter than the length of your beard. Make a note of the setting you choose so that can set it for the next time you trim your beard neckline.
Even if you’re growing out your beard, keep the neckline and any hair on your neck short.
Get the trimmers and begin shaping your neckline by following the shape you want. Pull the trimmers down along the line to form the first line, then move the trimmers upward to eliminate any leftover hair below the line you’ve produced.
Clean It Up
Finally, rinse your neck and beard with water to remove any stray hairs before continuing with your usual skincare regimen. You may also apply a beard balm after trimming to nourish your skin and avoid ingrown hairs.
Alcohol-containing products should be avoided since they can be harsh on the skin. Finish with some beard oil to help keep your beard in good condition and minimize split ends and breakage.
After shaving above the imaginary line, adjust your clipper to two settings shorter to shave below. By leaving the top half and cutting the bottom half, you should be able to get the ideal tapered effect.
If you keep using this strategy, you’ll have a lovely fade rather than a hard line across the neck. After you’ve completed shaping and dying your beard, go around and pick up any stray hairs. If you have a lot of hair, this may include any chest hair that comes out of your collar.
Using A Razor
Razors can actually provide a more exact trim since you can simply discern where the shaving will begin. You will also prevent the aggravation that comes with using razors with many blades.
You’ll have a few various sorts of razors at your disposal depending on the aim you want to reach with your neckline.
When sharpened properly, the cut-throat razor will give you the closest shave.
Sharpening enhances the attractiveness of this razor, but it is also the most difficult to maintain. It necessitates an understanding of the stropping method.
You must use this procedure every time you shave the neckline with a straight razor to realign the blades and keep the edge sharp.
Because the cut-throat razor does not use disposable blades, all of this is required.
You’ll be able to do it yourself once you’ve mastered the stropping and sharpening procedure. However, you may need to pay someone with experience to perform it for you a few times initially.
Many guys prefer safety razors with two blades. For starters, these vintage tools look and feel great. In summary, there’s something special about utilizing one of these.
Overall, they are simple to use. Safety razors might be intimidating to newcomers to shaving, but they are quite safe to use. The blade, for example, is fixed at an angle to assist avoid nicks and cuts. \
However, the blade’s “locked-in” position might make shaving around angular regions of your face more difficult.
The blades on these razors are interchangeable and inexpensive. As a result, the safety razor is the greatest option for guys who don’t want to spend hours caring for it while saving money.
Cartridge razors require the use of a razor which is also known as a razor handle as well as separately purchased cartridges. Above all, the best cartridge razors assist to minimise nicks and cuts. They are very simple to use and manage as you move about your face and neck.
While the handle element of a cartridge razor system is very inexpensive, the blade cartridges may cost a considerable amount over time, depending on how frequently you change out the cartridge.
Shavettes offers both the safety razor and the cut-throat razor. It resembles the cut-throat razor in appearance, although it is not nearly as sharp.
Shavette, on the other hand, employs disposable blades, exactly like a safety razor. The difference here is that the learning curve is steeper than with the safety razor.
With a little effort and experience, electric razors are fantastic for shaving whiskers down to the skin or shortening their overall length. An electric razor can maintain the skin not covered by your beard entirely whisker-free.
As well as this, you can trim your beard with an electric razor but make sure that you do not hold them too close to your skin. It takes a steady hand and steel nerves to execute this, so proceed with caution.
Using A Beard Shaping Tool
If you’re having problems finding out how to trim your beard neckline, a beard shape tool can come in handy.
A Beard Shaping Tool is used to precisely shape a beard for clean edges and lines around the cheeks, jawline, and chin.
These tools are frequently made of plastic, although more expensive tools may be made of metal or wood. Additionally, some beard shapers have other functionality such as a sideburn shaper and beard comb.
You don’t need to sketch the form of your beard using a barber pencil. You may effortlessly align your beard form with a beard shaper guide with clear material on the edge and begin cutting away.
When it comes to beard form templates and guiding tools, you’ll note that they come in a wide range of shapes and materials.
Some include many methods for lining and edging your beard hair, while others are quite simple and only assist you in keeping the lines on your cheek and neck symmetrical.
Simply align the beard shaping template with your cheeks and jawline, then cut following the pattern with your trimmer or scissors.
As a consequence, both sides of the beard are exactly symmetrical. When shaving your neckline, position the beard form tool beneath your jaw and use the guidance to swiftly produce an equal line.
If You Made A Mistake
Allow your beard hair to grow for a week or two to fix neckline faults. Then return to creating the new, evaluated line, allowing the experience to guide you to a lower position on your neck.
You must trim your beard to the correct length and style, as well as redefine the neckline. Patience plays a big part in repairing a neckline that is either too high or too low.
Alternatively, you may wait two or three days rather than several weeks before carving a new neckline below the old one. The hairs you wish to keep will eventually balance out with your beard and mix in the way you want them to.
How To Prevent Cutting Whilst Shaving
Prep The Face
To ensure a clean shave, wash your face with hot water before beginning this regimen. Using a towel, keep your face damp and dry.
Apply Shaving Gel
Shaving gels are the most effective way to reduce friction between the blade and your skin. Choose a high-quality gel to preserve your skin and provide a comfortable shave. Apply a little layer of lotion to your skin and massage it in. Allow it to calm down.
Begin shaving on either side of your face and slowly drag the blade down. Shave the sideburns first since shaving gels react faster on flat areas.
Then, work your way up to your top lip, chin, and around your ears. When you work slowly on these regions, the shaving foam has time to settle. Allow the razor to do its job and be patient with the procedure.
After shaving your entire face and neck, wash off the leftover gel and check to see if you missed any hair follicles.
Apply Post-shave Gel
Avoid using traditional aftershaves since they might alter the texture of your skin. It can cause red burns as well as an unpleasant sting.
Prepare your skin for the difficulties by using post-shave gels, which do not harm your skin and are meant to soothe it. If shaving gel is not available, a gentle moisturizer can be used instead.
If you still wind-up bleeding after a beautiful, smooth shave, a lip balm is your best choice. Apply it to your face lightly. Tissue paper should not be used since it might cause a bloody mess later on.
Maintaining Your Beard Neckline
Maintaining your beard neckline should be easier if you follow your natural hairline. Consider that shaving particular sections of your face repeatedly to achieve a specific appearance each day might result in some very sensitive skin.
Men’s throats are generally highly sensitive, so think ahead when charting your desired beard neckline.
When your skin’s pores are open, it is easier to trim and shave. The finest times are after a shower or after applying warm water or steam to your face and neck.
However, after trimming, you should shut your pores. To do so, use cold water or an alcohol-free aftershave to your skin. This assists in keeping your skin clean and healthy.
Beard Style Ideas
This beard is usually no longer than two to three inches and is close-cropped. There are men who have beards at this length, and they are still uneven and unconnected, so pulling off the corporate beard is best if you are able to grow a thick beard.
As the name says, the corporate beard is something you should be able to wear in any work situation, therefore it is you will need to be prepared to comb your beard regularly so that you can keep it looking neat.
Short and Round
Because it follows the natural curvature of the face without adding too much extra mass to the cheeks, a rounded beard is an ideal short beard choice for guys with round, square, or diamond-shaped features.
Too much length on the cheeks might give a chipmunk impression on males with broad facial types. Allow your beard to develop for about one or two months and keep everything at a constant length to get a short, rounded beard.
This beard style is a skin fade, but it is on your face instead of your head, and over recent years has become more and more popular. The fading occurs in two areas: the sideburns and the face and cheek.
By maintaining the thickness of your beard on the chin, the overall shape will be sleek and helps trim and extend the face’s contour. It is a clean aesthetic that works best when your beard is three to six inches long and lined up with a barber’s precision.
The Verdi has a handlebar mustache and a three to four-inch circular beard. The handles of the mustache are waxed and curled over the top of the beard. Some guys choose to maintain their mustache distinct from their beard.
You’ll need four to eight months of beard development and probably longer for the mustache to reach handlebar length to achieve the Verdi. Maintain a naturally rounded beard shape.
This beard style is an angular variant of the corporate beard, but with a bit more length around the chin—this helps produce the boxed beard’s sharper edges and emphasizes the jawline.
Allow your beard to grow for two to three months to get the short boxed look. You’ll need a Beard Trimmer with different length guards to produce a taper from the sideburns to the chin.
On the chin, use a number four guard. Then, on the cheeks, taper to a number three guard and a number two guard on the sideburns.
A boxed beard suits many facial types, but it looks especially beautiful on oval and oblong features.
The unkempt beard adds ruggedness to your appearance. Scuff is a style that anybody may wear, regardless of whether their beard is spotty or incredibly thick.
Allow about four weeks of beard growth to get a scruffy beard. If your beard begins to creep down towards the adam’s apple after three weeks, you may need to cut your neckline.
Power beards are serious business. It is a beard style that straddles the line between rustic and modern.
Power beards, also known as natural beards, range in length from four to six inches. The true personality of your beard will start to come out and embracing it is part of what makes this beard so unique.
Some will be straight, while others will be wavy or curly. It is critical to learn sophisticated beard style techniques.
How To Look After Your Beard
Now that you have neatened up your neckline, your beard is on the road to looking perfect. All you have to do now is look after it by keeping it healthy, soft, and thick.
You can also promote beard growth which is great if you have made a mistake when trimming!
Wash It Properly
While it is critical to utilize the correct amount of liquid, you need also pay close attention to the temperature.
You may want to take scorching showers, but this is not the best setting since it will dry up your beard’s hair follicles. Use lukewarm water to care for your beard since it will open your pores, enhance blood flow, and efficiently eliminate any accumulated dirt and oil.
After you’ve properly wet your face, lather up like you would with a face wash. Before applying any product to your hair, it is critical to understand the many forms of beard wash. While there are several brands available, they mainly consist of solid bars and liquid shampoos.
After you get out of the shower, continue your beard care routine by patting it dry with a towel. Don’t be overly aggressive when drying your hair, since this might disrupt its normal growth cycle.
Before beginning, ensure that everything has completely dried out, since any product you use may not have the desired impact on damp hair.
A hairdryer can speed up the process, but it can also damage your hair, so use it sparingly. After you’ve dried everything, add beard oil and let it soak in, then you can add some leave-in conditioner and use a beard comb to comb it straight.
Use The Right Products
There are a lot of different beard grooming products out there that you can choose from but if you are just beginning your beard journey, it can be overwhelming. But if you stick to this guide, you will have a much better idea of what to look out for in order to give your beard the care it deserves.
Beard Balm is great for hydrating your beard; it is ideal for those with big beards and will take a bit longer to fully absorb. The balm lasts longer and has enough grip to comb down difficult stray hairs.
Beard balms, on the other hand, should not be used as styling tools, despite the fact that they can provide stiffness and hold to your beard. Beeswax-based beard balms are harder in texture than butter and lanolin-based balms, which are creamier and gentler.
Beard oils are often made up of a combination of carrier oils such as argan, essential, and jojoba oils. These oils nourish the beard hair while also moisturizing the skin.
Contrary to common opinion, beard oils are not styling products. Beard oil, on the other hand, is a conditioning treatment that you use to maintain your skin and beard healthy.
It is good to see if there is silicone in the beard oil, as silicone is prone to hiding split ends and dry hair, and it doesn’t truly condition the hair; it only makes it appear like it is conditioned.
You should also avoid beard oils manufactured with heavy carriers, such as olive oil.
While these oils are less expensive, they sit on the surface of your beard hair rather of being absorbed, which is bad for the health and beauty of your beard. You should also avoid beard oils that include fragrances other than essential oils.
Style your beard using mustache and beard waxes. Almost all current waxes are scented, however they do not nourish your beard like beard balms and oils.
Beard waxes are essential if you want to keep your beard looking nice all the time. They’re also ideal for males with mustaches or beards that don’t want to remain put.
Combs and brushes are essential for keeping your beard from straying in any direction. Using combs and brushes maintains your hair in place and prevents ripping out the required strands.
The brushes and combs are ideal for getting rid of any dead hairs and shaping it into the desired style.
However, products created expressly for beards will greatly surpass ordinary combs and brushes. Choose a boar bristle brush to get the most bang for your money — it is the finest brush for brushing out your beard.
When going through your beard, boar brushes feel firmer. It combs and retains hair better than a regular comb or brush. Look for a brush with a wide-tooth comb for the best results.
Finer combs feel wonderful going through your beard, but they tend to get trapped and pull the hair too readily. You could wish to invest in a higher-quality comb with polished teeth.
The polished teeth allow the comb to slide over your beard without getting trapped or tugging out hairs.
When it comes to hairstyling, it is always vital to get the proper appearance; you want it to complement your face. You can quickly get rid of stubborn hair that won’t budge even after using balm or oil, and you may shape it to your liking with scissors and trimmers.
When To Use Beard Care Products
The only beard care items that may be used every day are beard balms and oils. To maintain your beard healthy, use beard care products such as waxes or washes just two to three times each week.
Washing your beard too frequently can deplete it of its natural oils, resulting in a flaky and dry beard.
You should also trim your cheek and necklines every few days to help keep your beard in form and to make it seem nicer.
You may take this a step further by clipping any stray hairs that appear when trimming your neck and cheek lines. Again, this is intended to maintain your beard in form and tidy.
You should shape and trim your beard once a month. You don’t have to trim your beard every month. Instead, you can clip stray hairs and then let your beard grow naturally. If you’re unsatisfied with the length of your beard, go ahead and trim it to the desired length.
The amount of beard care products you use will also be determined by your living circumstances and environment. Living in colder climates may cause your beard to dry out faster, necessitating more oil, and vice versa.
So, that is how you properly create a neckline, and now that you know – you can have peace of mind that you will never have to walk around with a wonky-looking beard again.
There is a selection of tools that you can use to trim your beard including trimmers, razors, and beard shaping tools. This allows you to find the tool that works best for you.
Keep in mind though that having the correct neckline is just a portion of making your beard look as good as possible. You should also think about products and general beard care which were covered in this guide.